Mitsubishi RC-EX3 User Manual page 63

⑥ Defrost operation display
When frost on the OU heat exchanger is accumulated and the conditions for start defrosting are established, the
defrost operation control is performed automatically. Select ON/OFF for the Defrost operation display.
1
Tap the
Menu
R/C display setting
Defrost operation display
ON
OFF
Select the item.
⑦ Auto cooling/heating display
Select ON/OFF for the display of the Auto cooling or heating.
1
Tap the Menu
R/C display setting
Auto cooling/heating display
ON
OFF
Select the item.
button on the TOP screen and select
⇒
Defrost operation display
2
The Defrost operation display selection screen is displayed.
On the Defrost operation display selection screen, select ON/OFF of
the display. The heating standby control is operated to prevent
blowing of cold air at the start of a heating operation.
ON ... The message "Defrost operation" is displayed during the
OFF ... The message "Defrost operation" is not displayed.
Back
button on the TOP screen and select
⇒
Auto cooling/heating display
2
The Auto cooling/heating display selection screen is displayed.
On the Auto cooling/heating display selection screen, select ON/OFF
of the display.
ON ... The message "Auto Cooling" or "Auto Heating" is displayed
OFF ... The message "Auto" is displayed on the "Change operation
Back
User setting
.
defrost operation.
User setting
.
on the "Change operation mode" button at the TOP screen
during the auto mode operation.
mode" button at the TOP screen.
－ 61 －
⇒
Administrator settings
⇒
Administrator settings
⇒
⇒