Mitsubishi RC-EX3 User Manual page 73

■ "In operation for rotation.", "In operation for capacity back-up",
"In operation for fault back-up" displays
16 ： 32 (Mon)
Cooling
Set temp
Timer
In operation for rotation.
F1: High power F2: Energy-saving
■ "Invalid request. Central control active." display
When the unit is controlled through a central control device (not included), and you performed an operation other than
the followings, the message "Invalid request. Central control active." is displayed.
16 ： 32 (Mon)
Cooling
Set temp
Timer
Invalid request. Central control active.
F1: High power F2: Energy-saving
■ "In temporary stop mode", "In forced thermostat OFF", "In setting
temperature shift" displays
16 ： 32 (Mon)
Cooling
Set temp
Timer
In temporary stop mode
F1: High power F2: Energy-saving
When rotation, capacity back-up, or fault back-up operation is enabled
Menu
during installation, a message indicating the operation that is set and
running will be displayed on the message display.
Direction
Refer to the installation manual on how to make these settings.
This does not indicate a failure; the message indicates that the unit is
CENTER
Menu
controlled through a central control device.
Direction
[Operations allowed during central control]
・Filter sign reset
・Administrator settings
These messages will be displayed when the unit is operated through IO
Menu
external input.
This does not indicate a failure; the message indicates that the unit is
Direction
operated through IO external input.
－ 71 －