Mitsubishi RC-EX3 User Manual page 26

Peak-cut timer
Wed: No.1
Peak-cut
Tap ▲▼
to set peak-cut & tap [Set]
Peak-cut timer
Mon: No.1
Start time
State
7:00 AM
Disable
End time
8:00 AM
Select the item.
Peak-cut timer
Weekdays
State Start time End time
Enable 7:00 PM 8:00 PM
7:00 AM 8:00 AM
Disable
Disable
Disable
Change Enter
Select a line & tap [Change].
Peak-cut timer
Do you want to apply group setting?
Yes
9
Set Back
10
11
Change
Set Back
12
Back
13
14
Back
Set the peak-cut %.
Set the peak-cut % with the
The peak-cut % can be set at 0%, 40%, 60% or 80%.
The lower the peak-cut % is, the higher the effect of
energy-saving becomes.
Tap the Set button after the setting.
(☞10)
The setting content check screen (☞6) is displayed. If the
Set button is tapped, the contents are confirmed and a day
of the week setting content check screen (☞5) is displayed.
If the settings are corrected or added further within the same day,
repeat the setting. (☞5)
■When contents of the setting are duplicated, the priority is given to the set
contents of smaller peak-cut %.
Display a day of the week setting content check screen. To save
the setting, tap the Enter button.
a) In case of group setting: (1-①Weekdays, 1-②Sat, Sun, 1-③
All days) Move to the group setting check screen. (☞13)
b) In case of individual setting: (1-④Each day) Save the setting
and move to a day of the week selection screen (☞2)
Display the group setting acknowledge screen.
Tap the Yes button to save the setting.
The display changes to a day of the week setting check screen
after the saving. (☞2)
When making the setting after changing a day of the week, repeat
the setting from the step 2.
－ 24 －
▲ ▼
buttons.