Silent Mode Control - Mitsubishi RC-EX3 User Manual

Silent mode control

The OU is controlled with priority on quietness. You can start/stop the silent mode control with a single tap of a button.
Silent mode control must be set to the F1 or F2 switch (☞page 63). Use the Outdoor unit silent mode timer
to set the start and end time (☞page 53).
1
When you press the F1 ( F2 ) switch, the administrator password input screen is displayed.
After you enter the password, the silent mode control will start.
MEETING1
16 ： 00 (Mon)
Auto
Set temp
Timer
Room
Outdoor unit silent mode control ON
F1: Silent mode cont F2: Home leave mode
3
When you press the F1 ( F2 ) switch during silent mode control, the display changes to the administrator
password input screen. After you enter the password, the silent mode control will terminate.
■Silent mode control will not be disabled even if you press the
Terminate the control with the F1 ( F2 ) switch.
■This operation is to select enable/disable of silent mode control. You cannot start the operation with the F1 ( F2 ) switches.
Start the operation with the
■When the sub R/C is set, the silent mode control cannot be used.
■During silent mode control, operation with maximum capacity is not allowed.
2
During silent mode control, "Outdoor unit silent mode control ON"
will be displayed on the message display.
Menu
Direction
Run/Stop switch.
－ 64 －
switch.
Run/Stop