Individual Flap Control; Individual Flap Control - Mitsubishi RC-EX3 User Manual

Individual flap control
Motion range (upper, lower, left, or right limit positions) of the flap at each blow outlet can be set to a desired range.
■When the R/C is set as the sub R/C, the individual flap control cannot be set.
1
Tap the Menu button on the TOP screen and select
tap the Change flap direction button on the TOP screen and select Ind. flap control , and then enter the
administrator password.
When one IU is connected to the R/C:
When two or more IUs are connected to the R/C:
Advice
・Individual flap control should be set when the unit is stopped.
・When you perform Individual flap control while the unit is in operation, the acknowledge screen for unit stop is displayed.
IU select
Next
Select an IU address.
☞3
☞2
2
When two or more IUs are connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
Back
－ 27 －
⇒
Useful functions Individual flap control , or