7. Notice of inspection date
If the next service date is set on the Service & Maintenance menu by your dealer, the following screen is displayed for
5 seconds at the start of operation and for 20 seconds from the end of operation on the beginning of the month which
includes the set date.
When this screen is displayed, contact your dealer.
Usage time
1 years & 9 months
Next check
10 / 2020
Company
Phone No.
Usage time
12 years & 9 months
Next check
10 / 2020
Company
Phone No.
It's the end of a product's life.
Please make an inspection
8. Message display
During operation, the following messages will be displayed on the message display to notify the current condition of
the unit.
■ "Standby. Wait a while." displayed
0 : 33 (Sat)
Auto
Set temp
Timer
Standby. Wait a while.
F1: High power
F2: Energy-saving
When the period of use exceeds 10 years, the screen shown at left is
displayed.
When this screen is displayed, contact your dealer.
The message "Standby. Wait a while." may be displayed (maximum of
Menu
30 minutes) on the R/C during the first operation following a breaker
power on or power loss.
Direction
This does not indicate a failure; it is caused by the cooling machine oil
protect control that is activated in order to protect the compressor.
Please wait until the message "Standby. Wait a while." disappears.
- 69 -