Quick Reference Of Menu Items - Mitsubishi RC-EX3 User Manual

3. Quick reference of menu items

Quick reference of menu items
It is necessary to input the Administrator password for menu items showing.
Setting and display items
Useful functions Individual flap control
Anti draft setting
Timer
Favorite setting
Administrator password
Weekly timer
Home leave mode
Administrator password
External ventilation
Select the language
Energy-saving setting Sleep timer
Administrator password
Peak-cut timer
Automatic temp set back
Infrated sensor (motion sensor) control
Set the moving range (upper and lower limit positions) of the
flap at each blow outlet of IU.
Set also the left limit position-rights limit position if FDK is
used.
If the panel with anti draft is used, set enable/disable of the
each operation mode and anti draft operation of each blow
outlet.
Set ON timer by
Set the time to operate the unit after stopping the operation
hour within the range of 1 - 12 hours (at 1-hour intervals).
Set OFF timer by
Set the time to stop the operating unit within the range of 1
hour - 12 hours (at 1-hour intervals).
Set ON timer by
Set the clock time to start operation.
■The time can be set at 5-minute intervals.
clock
■It can be selected from once (only one day) or every time
(every day).
＊Clock setting is necessary to set the timer.
Set OFF timer by
Set the time to stop operation.
■The time can be set at 5-minute intervals.
clock
■It can be selected from once (only one day) or every time
(every day).
＊Clock setting is necessary to set the timer.
Set each operation mode and setting temperature, fan speed,
flap direction for Favorite setting 1 or Favorite setting 2.
On timer or Off timer on weekly basis can be set.
■8-operation patterns per day can be set at the maximum.
■The time can be set at 5-minute intervals.
■Holiday setting (including temporary day off) is available.
＊Clock setting is necessary to set the time.
When the unit is not used for a long period of time, the room
temperature is maintained at a moderate level, avoiding
extremely hot or cool temperatures.
■Cooling or heating is operated according to the outdoor
temperature and the set temp.
■Set temp and fan speed can be set.
The ventilation is turned on or off if ventilation equipment is
attached.
Set the language to be displayed on the R/C.
Set the time period from start to stop of operation.
■The selectable range of setting time is from 30 to 240
minutes (at 10-minute intervals).
■When the setting is "Enable", this timer will activate
whenever any operation starts.
Set the times to start and stop the capacity limiting operation
and the peak-cut %.
■4 operation patterns per day can be set at the maximum.
■The setting time can be changed at 5-minute intervals.
■The selectable range of peak-cut % is from 0.40 to 80% (at
20% intervals).
■Holiday setting (including temporary day off) is available.
＊Clock setting is necessary.
It returns to the set temperature when the set time is counted
up.
■The selection range of the set time is from 20 to 120
minutes (at 10-minute intervals).
If the motion detector is used, set enable/disable of Power
Control and autosave.
－ 16 －
Details
page 27
page 31
page 39
page 40
page 41
page 41
page 50
page 42
page 46
page 32
page 65
page 21
page 22
page 25
page 26