Settings And Operations; Energy-Saving Setting; Sleep Timer - Mitsubishi RC-EX3 User Manual

4. Settings and operations

Energy-saving setting [Administrator password]

Energy-saving setting

Sleep timer

Peak-cut timer
Automatic temp set back
Infrared sensor control
Select the item.
■Sleep timer
Stops operation when the amount of time set has elapsed since the start of each operation.
Sleep timer
A/C will stop at the set minutes later.
State
Disable
min.
2
Set
Tap ▲▼ to set the minutes & tap [Set].
1
Tap the Menu button on the TOP screen and select
Energy-saving setting
screen is displayed.
2
When the Energy-saving setting screen is displayed, select a desired
item.
Back
・Sleep timer
・Peak-cut timer
・Automatic temp set back
Infrared sensor control
1
Tap the
Energy-saving setting
screen is displayed.
2
Select a desired time with ①
Setting range: 30 to 240 minutes, at 10-min intervals.
3
1
Tap the ② State button to switch between "State Enable" and
"State Disable".
Back
・"Enable": operation stops at the set time every time.
3
・"Disable": the sleep timer does not operate.
Unless the Sleep timer is used, set at the "State Disable".
4
After the setting, tap the ③
the Energy-saving setting menu screen.
. The Energy-saving setting menu
Menu button on the TOP screen and select
⇒ Sleep timer . The Sleep timer
－ 21 －
......☞page 21
......☞page 22
......☞page 25
......☞page 26
▲ ▼
buttons.
button. The display returns to
Set