Favorite Setting Operation - Mitsubishi RC-EX3 User Manual

Favorite setting operation

You can start an operation with the operation mode, set temp, fan speed, flap direction registered to Favorite set 1
and Favorite set 2.
Settings for the operation mode, set temp, fan speed, flap direction can be registered from Favorite setting on the
menu (☞page 49).
Favorite setting operation must be set to the F1 or F2 switch (☞page 63).
16 ： 32 (Mon)
Cooling
Set temp
Timer
In operation for running.
F1: Favorite set 1 F2: Favorite set 2
1
When you press the F1 ( F2 ) switch, the operation mode, set
Menu
temp, fan speed, flap direction registered to Favorite set 1 or
Favorite set 2 will be enabled.
Direction
■ Operation will start even if you press the F1 ( F2 ) switch while the unit is
stopped.
■You can change the operation mode, set temp, fan speed, flap direction after
the operation has started with the favorite setting operation.
■Following power on, the unit starts to operate initially with the following settings
for both Favorite set 1 and Favorite set 2.
Operation mode
Set temp
Fan speed
Flap direction
＊When an FDK with a left/right flap is connected
Left/right flap direction
3D AUTO
■When Change set temp, Change operation mode, Change flap direction,
Change fan speed are restricted by the Permission/Prohibition setting (☞page
52), restricted items will not be reflected to the Favorite setting operation.
－ 50 －
...Cooling
°C
...28
...3-speed
...Position 2 (☞page 10)
...Center
...Disabled