Set On Timer By Hour - Mitsubishi RC-EX3 User Manual

■Set ON timer by hour

When the set time elapses, the air conditioner starts.
1
Tap the Menu
Set ON timer by hour .
Set ON timer by hour
A/C will start at the set hours later.
hours
Next Cancel Set
Tap ▲▼ to set clock time & tap [Set].
Set ON timer by hour
Details
Set temp
Warming up
Previous Set
Select the item to change.
Advice
Warming up
· To warm up the room temperature closed to the set temperature at the set start time of the operation, the microcomputer estimates the
start time of the operation based on the last warming up operation and starts the operation 5 to 60 minutes earlier.
· When the warming up is turned ON, set the timer at one hour earlier or more than the start operation by timer.
If it is set in less than one hour, a message "Warming up cancelled" is displayed on the screen. (This is used as the Set ON timer by hour
and clock.)
Set ON timer by hour
Cooling
Dry
No setting
Please select operation mode.
button on the TOP screen and select
2
The Set ON timer by hour setting screen is displayed.
Select desired hours for the period to start operation by timer with
the
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
When operating conditions at the start of operation are set, tap the
Back
When operating conditions are not set, tap the
4
Set the following operating conditions.
① Warming up ON/OFF (the Main R/C only)
② Operation mode
Cooling
③ Set temp
④ Fan speed
■Warming up setting can be made with the main R/C only.
Back
■Set the operation mode before setting the set temperature.
5
Tap a desired operation mode.
If the No setting button is tapped, it starts operation at the last
action. (☞4)
Fan
Heating
Auto
Back
Useful functions
▲ ▼
buttons.
Next button. (☞4)
... ☞5
... ☞6
... ☞7
－ 39 －
⇒ Timer ⇒
button.
Set