Installing The Memory Card (Compactflash) - Kyocera Mita Ecosys FS-1010 Service Manual

(6) Installing the memory card (CompactFlash)

The main board of the printer is equipped with one slot for memory card.
CAUTION Take precautions that no foreign substances such as metal chips or liquid get
inside the printer during the installation process. Operation of the printer during
the presence of a foreign substance may lead to fire or electric shock.
WARNING Turn the printer's power switch off. Unplug the printer's power cable and
disconnect the printer from the computer or the network. Never insert or
remove a memory card while the printer power is ON.
Failure to turn the power switch OFF will immediately halt the printer with a
Memory card err20 message (this message may not always appear).
It also could result in any damage to the printer's electronic parts or the
memory card. Turn the power switch ON again to restart the printer.
Remove the two screws 1 from the option interface slot cover 2 and remove the option interface
slot cover (or network interface card 3 or the serial Interface board) .
2
Figure 2-2-9 Removing the option interface slot cover
FS-1010
1
3
2-12
1