Operating A Compactflash (Memory) Card - Kyocera Mita Ecosys FS-1800+ Operation Manual

Using the Operator Panel

Operating a CompactFlash (Memory) Card

Memory Card
MENU
?
ENTER
The printer is equipped with a slot for a CompactFlash card. By inserting a
>
CompactFlash card into the printer, the following operations become
available. For details about the handling of the CompactFlash card, see
Appendix D.
• Reading font
• Reading data
• Writing data
• Deleting data
• Formatting a CompactFlash card
• Print a list of data names
Reading Fonts
If a CompactFlash card is already inserted into the slot when the printer is
turned on, the fonts are automatically read into the printer.
To re-read fonts into the printer from a CompactFlash card, proceed as
follows.
1
Press the MENU key.
2
Press the
Memory Card
3
Press the > key.
4
Press the
>Read fonts
5
Press the ENTER key. A question mark (?) appears.
>Read fonts ?
or key repeatedly until Memory Card > appears.
>
or key repeatedly until >Read fonts appears.
1-76