Parking Brake For Hydraulic Transmissions - New Holland T4.75F Operator's Manual

Parking brake for hydraulic transmissions

Parking lock
NOTICE: On models with Power Shuttle and HI-LO when leaving the machine, besides applying the hand brake you
MUST engage the parking brake Parking lock.
Figure 1 configuration with HI-LO, Power shuttle.
Figure 2 configuration with HI-LO, Power shuttle and
creeper unit.
Besides the hand brake (1) there is the parking brake con-
trolled by the lever (2). Its operation is as follows:
Engagement
With the tractor stationary, move the lever from the central
neutral position on the left, then forwards in the direction
(P) and subsequently to the right as shown on the plate
on the lever.
Disengagement
Before setting off with the tractor it is necessary to dis-
engage the brake. With the tractor stationary, move the
lever to the left, then backwards as shown on the plate on
the lever.
If you try and move the machine with the parking brake Parking lock engaged, the following warning
light will light up on the central display accompanied by an acoustic signal. Never try moving the
machine in this situation to avoid mechanical damage.
3 - CONTROLS/INSTRUMENTS
3-44
1
MOIL13TR00956AA
2
MOIL13TR00957AA