7 - MAINTENANCE
Opening the hood
To access the engine components and carry out inspec-
tion, lubrication and maintenance operations, the bonnet
must be opened (1). The following instructions describe
the procedure to be followed.
The hood is hinged at the rear to allow easy and safe
access to the various engine components.
To open the bonnet, insert the engine starter key into the
hole shown (on the front of the bonnet) and press on the
catch to unhook the bonnet. Raise the bonnet with the
special handle, an internal strut will keep it in the raised
position.
1
DCSPFNEGB024S7A
To close the hood, push it fully in. An audible click will
signal engagement of the locking catch. Check that the
hood is properly closed.
7-10