New Holland T4.75F Operator's Manual page 242

• Turn knob (2) VOL (left/right) to select PLAYLIST – ARTISTS – ALBUMS – SONGS – GENRES – COMPOSER
• Press SEL.
If you are aware on how to use iPOD, the way to use the vehicle stereo feature is basically just the same. Take note
of the equivalent key function below.
Radio
Turn the VOL knob (left/right)
Press the VOL knob
NOTE: Please refer to your iPOD user's manual for operating instructions. Press A/PS to return to the main menu.
How to use BLUETOOTH in your vehicle audio system
Before you can dial out from the vehicle stereo, you must first pair (PAIRING) the phone with the radio. This
"pairing" is a procedure for connecting two devices equipped with Bluetooth.
1. This unit's Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer to your
cellular manual on proper pairing
2. Perform the search for available Bluetooth devices, "CAR--BT" will show. Enter 0000 when the code is re-
quested.
3. After successful pairing, connect to the head unit if it is not automatically connected.
How to make / receive calls using the front panel
To make calls using call history
• Press and hold button (5) to display the "REDIAL" history.
• Turn repeatedly to select the telephone number to call and press button (5) to start the call.
• During conversation, press button (18) to end the call.
• When there is incoming call, press button (5) to receive the call.
• Press button (18) to reject the call.
Audio Streaming
If your phone is "A2DP" format compatible, you can play music from your mobile and the music will be transferred
to the vehicle audio system
1. Make sure your mobile and the vehicle radio unit is paired and connected.
2. Play the music in your mobile according to your mobile operating method.
3. The unit will display "A2DP" when receiving A2DP automatically (but for some mobiles your have to press the
MODE button to change A2DP mode).
4. You can press buttons (6) on the unit for the previous or next tracks.
CHARACTERISTICS
PLAYER MP3/WMA
Signal to Noise ratio
Channel separation
Channel separation
Radio (FM) — (RDS)
Frequency range
Channel step
Intermediate frequency
Sensitivity
Stereo separation
Signal to Noise ratio
Radio MW (AM
10 - ACCESSORIES
iPOD
Turn click wheel
Press button SELECT
> 60 dB
> 50 dB (1kHz)
20Hz – 20 kHz
87,5 - 107,9 MHz
200 kHz
10,7 MHz
2,8 μV
30 dB
50 dB
10-4
Function
Up/down category/file browsing
Selecting a category / Play song