Lift-O-Matic® Control - Operating - New Holland T4.75F Operator's Manual

Lift-O-Matic® control - Operating
The lever (1) is used to position the implement in an infi-
nite number of positions. In both the lowering and raising
phases, the implement stops at the height corresponding
to the position where the lever is stopped.
Lifting
• Fixed neutral position of the lever.
The lever, when moved gradually rearwards, causes the
implement to raise up. In this condition, when the lever
is released it returns automatically to the central neutral
position, while the lift keeps the new set position.
• Fixed position of the lever on full height
The lever (1) moved fully back, quickly raises the imple-
ment up to its full height. In this condition the lever is held
in the fully back position.
Lowering
• Fixed neutral position of the lever
The lever, when moved gradually forwards, causes the
implement to lower. In this condition, when the lever is
released it returns automatically to the central neutral po-
sition, while the lift keeps the new set position.
• Fixed position of the lever on full lowering
The lever (1) moved fully forwards, quickly lowers the im-
plement down to the limit set beforehand with the position
control lever (2). In this condition the lever is held in the
fully forward position.
NOTE: The lever (1) is particularly useful to make small
adjustments in height of the lift arms. Move slightly to the
right or left lever to make these adjustments.
6 - WORKING OPERATIONS
6-18
1
MOIL13TR01422AA
2
MOIL13TR01421AA