Attach The Implement - New Holland T4.75F Operator's Manual

Attach the implement

With the lower arms fully lowered, adjust the length of
the control cables (2), so that they do not drag on the
ground when attached to the tractor. Correctly adjust the
distance between the lower arm hook ends by tightening
or loosening the spacer spring rod (3).
Fit the conical pick--up profiles (1) fig. 2 on the implement
hitch pins, as shown in the figure.
Move the tractor forward, in position in relation to the im-
plement, then raise the lower arms: the implement will be
hitched automatically. The hook ends (2) fig. 3 should
engage in the locked position. If using 1st. category im-
plements, fit the reducer bushes on the implement hitch
pins.
NOTICE: Before lifting the implement, make sure that the
two hook ends (2) fig. 3 have engaged in the locked po-
sition.
Release the end of the top link by pulling back the control
cable (1) fig. 1 and hook onto the implement.
Adjust the length of the top link by tightening or loosening
the threaded sleeve.
NOTICE: The quick couplers are fitted to be able to be
locked so as to prevent the implement from accidentally
getting unhooked.
To prevent the implement from getting unhooked it is rec-
ommended to secure the catches (1) in the locked position
when using heavy overhanging implements (for instance,
grass cutters, inter--row hoeing machines that come out-
side the tractor clearance) or when travelling on public
roads.
To lock the catches (1), insert a screw (3) into the hole
(4) and lock it with a self--locking nut (2), available in any
hardware store.
6 - WORKING OPERATIONS
6-33
1
DCUTLNEIT046S6A
2
DCUTLNEIT045S6A
3
DCUTLNEIT047S6A
4
DCUTLNEIT048S6A