New Holland T4.75F Operator's Manual page 60

Front power take−off
NOTE: Only for models with SuperSteer™ axle
To engage the power take−off, lightly press the knob (1)
and raise the collar (2).
The warning light on the instrument
cluster will come on to signal the PTO has
engaged.
To disengage the PTO, simply press the knob (1) down-
wards.
Direction indicators
To indicate turning to the left, push the stalk (1) forward to
position (A). To indicate turning to the right, pull the stalk
back to position (B).
Flashing lights
With the lights off or dipped, pull the stalk upwards into
position (C) to flash full beam lights. When the lever is
released, it automatically returns to its original position.
Side lights
Turn the knob (5) to set the pointer (4) onto the symbol (2).
The position lights/taillights and instrument cluster lights
will come on.
Dipped beam headlights
Move the mark (4) on the knob (5) onto the symbol (6).
Horn
To sound the horn, press the button on the tip of the stalk
(5), as shown in the figure.
NOTE: When the mark (4) on the knob is aligned with
symbol (3), all the lights are off. Only the direction indica-
tors and the horn are still functional.
Pedal controls
1. Brake pedals.
2. Foot throttle.
3. Transmission clutch pedal.
3 - CONTROLS/INSTRUMENTS
3-22
5
MOIL13TR00798AA
6
MOIL13TR00503AA
7
MOIL13TR00504AA
8
MOIL13TR00542AA