Wheel track adjustment front 4WD and rear
2/4WD
You can fit the wheel disk with the camber directed in-
wards or outwards.
Each of these two disk positions provides a different track
width, as shown on the following pages.
When adjusting the wheel track, ensure that the points of
the tire treads are still facing in the direction of forward
travel, indicated by an arrow on the tire walls.
Always check that the front and rear wheels are symmetri-
cally aligned in relation to the longitudinal axis of the trac-
tor.
Front and rear wheels
Front — M16
Rear — M18
Front and rear wheels
1
250 - 310 N·m (184.4 - 229 lb ft)
280 - 340 N·m (206.5 - 250.8 lb ft)
2
NOTICE: Select the appropriate rear track before changing the front track.
WARNING
Crushing hazard!
Wheel drive assemblies are heavy. Use an adequate lifting device. Reposition one side at a time.
Failure to comply could result in death or serious injury.
6 - WORKING OPERATIONS
220 N·m (162.3 lb ft)
310 N·m (228.6 lb ft)
6-49
3
DCAPLNEGB081S3A
4
MOIL13TR00011AA
W0019B