Operator's Seat; Operator Seat - New Holland T4.75F Operator's Manual

OPERATOR'S SEAT

Operator seat

DANGER
Loss of control hazard!
DO NOT make seat or steering adjustments while the machine is in motion. Ensure all adjustments
are locked prior to use. Check the tightness of the securing screws and that the adjustment controls
are working properly. Fitting and/or repairing the seat should only be performed by skilled personnel.
Failure to comply will result in death or serious injury.
Before operating the tractor, it is important to adjust the seat to the most comfortable position. See the following text
and illustrations for details.
Mechanical seat
The driver's seat has adjusters for its suspension, height
and distance from the controls. You can therefore select
the most suitable position for driving.
Adjustment of distance from controls
From the driver's seat, pull the lever (1) sideways and
move the seat forwards or backwards. After moving the
seat, release the lever, ensuring that the seat is locked in
the chosen position.
Adjusting the seat suspension
Seat suspension can be adjusted by means of a han-
dle (2). Turn the handle until your approximate weight is
shown on the scale in the window (3) (where applicable).
Seat height adjustment
Turn the knob (4) to one of the three marked positions.
Air suspension seat (on request)
Adjusting the seat suspension
Adjustments to the air suspension are made by operating
the air compressor control button (1). To set the suspen-
sion and ride height, fully lower the seat. Pull the control
button (1), until all the air has been discharged. Turn the
ignition switch "ON" (first click). Sitting in the seat, push-in
and hold the control (1), the air compressor will start to
pressurise the suspension. Let go of the control when
the seat has reached the desired height. To make further
height adjustments, operate the air compressor control,
as required, to raise or lower the seat.
Adjustment of distance from controls
From the driver's seat, pull the lever (2) sideways and
move the seat forwards or backwards. After moving the
seat, release the lever, ensuring that the seat is locked in
the chosen position.
3 - CONTROLS/INSTRUMENTS
3-9
1
MOIL13TR00479AA
2
MOIL13TR00481AA
D0008A