New Holland T4.75F Operator's Manual page 128

Hydraulic adjustment of the right-hand lift
rod (on request)
The right-hand lift rod (2) fig. 2 is available with hydraulic
adjustment using the specific switch
• Press the switch (1) into position (A) to raise the rod;
• Press the switch (1) into position (B) to lower the rod.
Standard side stabiliser struts
To adjust the length of the struts (3) remove the cotter pin
(2) and rotate the coupling (1) of 90 ° for fast changes or
screw in or out for limited changes. Always reinsert the
cotter pin after adjusting the struts.
Side stabiliser struts with hydraulic adjust-
ment (optional)
The struts are adjustable with the switches (5) and (6). To
regulate the two lift arms, proceed as follows:
To regulate the swing of the struts, use the button (5)
• Press the button into position (A) to operate the right-
hand stabiliser strut;
• Press the button into position (B) to operate the left-
hand stabiliser strut.
On completing the adjustment, to lock the struts in the
determined position and completely cancel the swing of
the lower arms (4) fig. 5, press switch (6) into position
(C). To unlock the struts and keep the lower arm (4) free
to swing, press the button (6) into position (D).
NOTICE: With the switch (6) in the locked position (C), do
not operate the button (5) to regulate the struts. When the
lower arms need to be varied (4), the switch (6) must be
turned off and returned to the unlock position (D).
6 - WORKING OPERATIONS
6-30
4
MOIL13TR00827AA
5
MOIL13TR00829AA
6
MOIL13TR00832AA
7
MOIL13TR00834AA