Foot Throttle - New Holland T4.75F Operator's Manual

Hide thumbs Also See for T4.75F:
Table of Contents

Advertisement

Footbrakes
WARNING
Loss of control hazard!
Uneven brake force exists on left-hand and
right-hand brakes. Always use brake pedal
coupler when traveling on public roads to en-
sure brakes are actuated together.
Failure to comply could result in death or se-
rious injury.
The brakes can be operated independently ONLY to facil-
itate manoeuvres in confined spaces.
NOTICE: When travelling on the road and towing trailers
with hydraulically operated brakes, always join the brake
pedals (1) together using the pin (A), as shown in the fig-
ure.
NOTE: On four-wheel drive models, front axle transmis-
sion is automatically engaged when the brakes are ap-
plied on all four wheels. With automatic engagement of
4WD, the brakes function much more efficiently, therefore
care must be taken when braking sharply.

Foot throttle

The foot throttle (2) may be used independently of the
hand throttle to control the speed of the tractor. It is rec-
ommended that you use the foot throttle when driving on
the highway.
NOTE: When the foot throttle is released, engine speed
will reduce to the level set by the hand throttle. When
using the foot throttle, set the hand throttle onto the idle
speed position.
Transmission clutch pedal.
When the clutch pedal (1) is pressed on models with me-
chanical transmissions, drive is disengaged and the gear
ratio, range and forward or reverse travel can be selected.
On models fitted with the Power Shuttle electro-hydraulic
reverser, the clutch pedal is used to gradually transfer en-
gine horsepower to the driving wheels when starting to
move from a standstill.
NOTICE: Before starting the engine, fully depress the
clutch pedal (1).
NOTE: To prevent premature wear of clutch components,
do not use the clutch pedal as a foot rest.
3 - CONTROLS/INSTRUMENTS
W0081A
3-23
9
MOIL13TR00507AA
10
MOIL13TR00508AA
11
MOIL13TR00509AA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4.85fT4.95fT4.105f

Table of Contents