New Holland T4.75F Operator's Manual page 18

1 - GENERAL INFORMATION
(A)
FRAME IDENTIFICATION DATA PLATE
The tractor's frame number is stamped over the front sup-
port. It gives the safety frame identification data.
(B)
CAB IDENTIFICATION PLATE
The cab identification plate is located at the rear on the
left−hand side as shown in the figure.
(C)
FRAME AND ENGINE TYPE IDENTIFICATION SUM-
MARY DATA PLATE
The plate groups the identification data with your ma-
chine's frame number and engine number.
(D)
STANDARD FRONT AXLE IDENTIFICATION PLATE
The plate is located on the component and gives the iden-
tification data for the axle fitted on the machine.
(E)
ENGINE IDENTIFICATION DATA PLATE
The plate with the engine data installed on the tractor is
fitted on the right or left hand side of the engine (depend-
ing on the model).
2
MOIL13TR00764CA
1-10