Tachometer/rev-counter (1)
Engine rev counter. To obtain the engine rpm, multiply the
number indicated by the pointer by 100.
Digital display (2)
When the engine switches on, the digital display passes
automatically to show the tractor ground speed, in km/h
or MPH, depending on the set unit of measurement.
Digital display (3)
• Rear PTO speed (displayed automatically on starting
the engine).
• Clock.
• Rear lift position.
Engine temperature displays
1. Red area = engine overheating.
In this case, slow the engine to idling speed (without
stopping the engine) and, if the light stays on, have the
cooling system checked.
2. Green area = normal temperature.
3. Blue area = temperature too low.
Fuel gauge
Shows the fuel level in the tank. When the tank is full, all
the sections are illuminated. Whereas if the two bottom
sections (1) remain illuminated it means that the fuel level
is below 1/4 (reserve).
3 - CONTROLS/INSTRUMENTS
3-19
3
MOIL13TR00485AA
4
MOIL13TR00486AA
5
MOIL13TR00487AA