New Holland T4.75F Operator's Manual page 58

Multi-function display
The liquid crystal multi-function display (1) can show use-
ful and necessary information for the driver and a menu
that supports the following setting functions:
• Tractor ground speed calibration
• Instrument cluster dimming
• Buzzer on/off on pressing the buttons
• Speed indication selection in km/h or MPH
• Time display setting with 12 or 24 hour format
• Error code presentation.
The menu is navigated through by using the rocker
switches (1) and (2). Each switch has two control po-
sitions, depending on the side on which it is pressed.
To access the SETUP MENU, turn the key start switch
ON and keep the switch (1) pressed for more than three
seconds in position (B).
Switch (1)
(A) Exit/Cancel. Use this button (and that means this
switch position) to cancel or quit the setting and program-
ming modes.
(B) Return = See the MENU/RETURN or confirm button.
Press this key to select the programming setting and set-
ting confirmation mode.
Switch (2)
(C) Up arrow = scrolling up through the menu or numerical
value. Press this button (and that means this switch posi-
tion) repeatedly to scroll forwards in the menu or change
the value of a number.
(D) Down arrow = scrolling down through the menu or
numerical value. Press this button (and that means this
switch position) to scroll backwards in the menu or to
move to the right of a position.
3 - CONTROLS/INSTRUMENTS
3-20
6
MOIL13TR00488AA
7
MOIL13TR00489AA