New Holland T4.75F Operator's Manual page 108

Operation
When the joystick (1) is operated with a crosswise move-
ment, it operates the distributors on axis (X) and on axis
(Y) .
The same lever (1) when operated diagonally enables si-
multaneous operation of two variable flow rate distribu-
tors.
Underneath the joystick there are the switches (2) and (3)
that activate the distributors on the line (X) or (Y).
Press the switch (2) to the right or left on a specific colour
to activate the pair of distributors marked with the same
colour on the line (X)
Press the switch (3) to the right or left on a specific colour
to activate the pair of distributors marked with the same
colour on the line (Y)
Operation of the distributors of the corresponding line is
inhibited in the central position.
Connecting the Implement
Press the buttons (2) or (3) on a specific colour to activate
the corresponding pair of distributors of the same colour
on the line (X) or (Y) .
Connect the oil supply tube to the distributor marked (+)
and the return line on the distributor of the same colour on
the mark (-).
Joystick operation
To operate the connected implements observe the
following instructions:
• Switch (2) pressed to the right or left: line distributors
(X) on.
• Move the lever (1) to the right (X+) to lift, or to the left
(X-) to lower the connected implements. When the lever
is all to the right in position (D) it is held by a catch to
enable the float position.
• Switch (2) in the middle position: line distributors (X) off.
• Switch (3) pressed to the right or left: line distributors
(Y) on.
• Move the lever (1) forwards (Y+) to lift, or to the left (Y-)
to lower the connected implements. When the lever is
all forward in position (C) it is held by a catch to enable
the float position.
• Switch (3) in the middle position: line distributors (Y) off.
NOTE: A diagonal movement in the directions (E) to-
gether with a crosswise movement enables carrying out
multiple controls.
6 - WORKING OPERATIONS
6-10
2
MOIL13TR01011AA
3
MOIL13TR01010AA