New Holland T4.75F Operator's Manual page 71

Changing unit of measurement
If you want to turn audible warning on or off each time a
button is pressed, proceed as follows:
Turn the ignition key onto the first click, holding down the
symbol (B) on the switch for more than three seconds.
• The central display shows "SETUP MENU" as in detail
(1). Release the symbol (B) to go to detail (2) (CAL).
• Now press the arrow (D) on the switch and the display
will show the screens in sequence as illustrated in de-
tails (2) and (3).
• From viewing the detail (3) press the arrow (D)again
and the display will show "MPH km/h" as in detail (4).
• Press the symbol (B) and the display will show the last
setting made, "km/h" indicated by the arrow as in de-
tail (5) or "MPH" indicated by the arrow as in detail
(6). Press on the arrow (C) on the switch to pass from
"km/h" to "MPH" or on the arrow (D) to pass from
"MPH" to "km/h".
• From the condition of detail (5) press (B) to save ON,
the display will show "Value km/h Saved" as in detail
(7) or from the condition of detail (6) to save OFF, the
display will show "Value MPH Saved" as in detail (8).
NOTE: If you want to stop the display, press the symbol
(A) on the switch. This will automatically take you back
to the display as in detail (4). Press the same symbol
again to exit the programming menu.
3 - CONTROLS/INSTRUMENTS
3-33
4
MOIL13TR00553CA