EVERY 50 HOURS
Rear wheel hub
1. Check regularly that when AMBRA GR9 grease is
pumped in via lubricating nipple (1) (one on each
side), grease escapes from the internal guard. To fill
the grease chamber between the wheel hub and the
reducer housing uniformly, the wheel must be turned.
When working in particularly dusty or boggy environ-
ments, the operation must be carried out frequently to
expel any dust or water that has entered.
Lift and linkage
1. Using a grease gun, pump NEW HOLLAND A
GR-9 M
-
ULTI
PURPOSE GREASE
tion fitting shown.
2WD steering cylinder
1. Using a grease gun, pump NEW HOLLAND A
GR-9 M
-
ULTI
PURPOSE GREASE
ing nipples shown.
7 - MAINTENANCE
MBRA
grease into the lubrica-
MBRA
grease into the lubricat-
7-23
1
MOIL13TR00643AA
1
MOIL13TR00809AA
1
MOIL13TR00808AA