Audible warning ON/OFF
If you want to turn audible warning on or off each time a
button is pressed, proceed as follows.
Turn the ignition key onto the first click, holding down the
symbol (B) on the switch for more than three seconds.
• The central display shows "SETUP MENU" as in detail
(1). Release the symbol (B) to go to detail (2) (CAL).
• Now press the arrow (D) on the switch until the display
shows "BEEP ON/OFF" as in detail (3).
• Press the symbol (B) and the display will show the last
setting made, "BEEP ON" as in detail (4) or "BEEP
OFF" as in detail (5). Press on the arrow (D) on the
switch to pass from "ON" to "OFF" or on the arrow (C)
to pass from "OFF" to "ON" as in details (4) and (5).
• From the condition of detail (4) press (B) to save ON,
the display will show "Value ON Saved" as in detail
(6) or from the condition of detail (5) to save OFF, the
display will show "Value OFF Saved" as in detail (7).
NOTE: If you want to stop the display, press the symbol
(A) on the switch. This will automatically take you back
to the display as in detail (3). Press the same symbol
again to exit the programming menu.
3 - CONTROLS/INSTRUMENTS
3-34
5
MOIL13TR00552CA