Front Controls - New Holland T4.75F Operator's Manual

Front controls

1. Menu navigation button
2. Scroll and selection button
3. Hazard lights switch
Press the left side (with the symbol) of the switch (3)
to turn on the hazard light flashers; when pressed, the
switch starts blinking. The panel light flashes at the
same time as the direction indicators.
Potentiometers for selecting the functions of
the front lift
Version with cab and SuperSteer™ axle
1. Arm lifting limit adjustment control.
2. Working depth control potentiometer.
Power shuttle (Electro-hydraulic shuttle con-
trol lever)
1. The shuttle lever (1), located to the left of the steering
wheel, is used to select forward or reverse when a gear
ratio is engaged.
To select the drive direction, lift the lever and move
it forward for forward drive, or backward for reverse
drive. Drive direction can be selected without pressing
down the clutch pedal.
To change the drive direction keep the lever raised
and move it either forwards or backwards. Drive direc-
tion can be changed without pressing down the clutch
pedal.
1. Switch to raise/lower front lift
This switch is used only to lower or raise the implement
at each headland.
2. Four−wheel drive electro-hydraulic control switch.
Front-wheel drive increases the tractor's grip on the
ground; the advantages are evident when working on
uneven, muddy or slippery ground, when ploughing or
working in difficult conditions.
3 - CONTROLS/INSTRUMENTS
3-21
1
MOIL13TR00501AA
2
MOIL13TR00796AA
3
MOIL13TR00505AA
4
MOIL13TR00788AA