Every 50 Hours; Grease Fittings - New Holland Boomer 47 Operator's Manual

Every 50 hours

Grease fittings

NOTE: After every 50 hours of normal operation, apply a
good quality grease to the lubrication points listed below
(refer to the Recommended Lubricants chart). When oper-
ating under extremely dirty conditions, lubricate more fre-
quently than every 50 hours.
• Front Axle Pivot (1)
• Power Steering Cylinder (2) and steering arms (3)
(left and right)
• 3-Point Linkage (4)
To lubricate these points:
1. Wipe away all old grease and dirt from the lubrication
fittings to prevent dirt or foreign material from entering
as new grease is applied.
2. Use a grease gun to apply new grease to fittings.
3. Wipe away any excess grease.
7 - MAINTENANCE
7-18
1
93100922
2
93100921
3
NHIL12CT010120A