Exterior Controls; Hood Release Latch - New Holland Workmaster 25S Operator's Manual

Exterior controls

Hood release latch

WARNING
Rotating parts!
Shut off the engine before opening the engine hood.
Failure to comply could result in death or serious injury.
1. To open the hood, insert a small rounded tool like a
screw driver through the hole (1) and push it inside.
2. The hood opens in the forward direction and is hinged
at the front.
3. Grasp the rear of the hood and allow the hood to swing
open.
4. A gas cylinder is attached inside to support the hood
for easy access to the engine.
5. To close the hood, lay down the hood and push it down
slightly to lock position.
3 - CONTROLS AND INSTRUMENTS
3-39
W1059A
1
NHIL17CT01220AA