Interface Signals; Tool: Tool Compensation (W1); Tool And Tool Compensation Overview - Siemens SINUMERIK 808D Function Manual

Number Identifier
20201 CHFRND_MODE_MASK
Axis-specific machine data
32000 MAX_AX_VELO
35100 SPIND_VELO_LIMIT
Channel-specific setting data
42100 DRY_RUN_FEED
42010 THREAD_RAMP_DISP
42110 DEFAULT_FEED
18.4.2

Interface signals

Number
Channel-specific
DB3200.DBX0000
DB3200.DBX0004
DB3200.DBX0005
DB3200.DBX0006
DB3200.DBX0006
DB3200.DBX0006
DB3200.DBX1000
DB3200.DBX1004
DB3200.DBX1008
DB1700.DBX0000
DB1700.DBX0001
DB3300.DBX0001
Axis/spindle-specific
DB380x.DBB0000
DB380x.DBB2003
DB380x.DBX0001
DB380x.DBX2001
DB380x.DBX0004
DB390x.DBX2002
DB390x.DBX2002
19

Tool: tool compensation (W1)

19.1

Tool and tool compensation overview

Characteristics
The control system is capable of calculating the tool compensation data for different tool types (drill, milling cutter, turning
tool, ...).
● Length compensation
● Radius compensation
● Storage of the tool compensation data in the tool offset memory
– Tool identification with T numbers from 0 to 32000
Function Manual
01/2017
Bit Name
.6 Activate dry run feed
- Feed override
Rapid traverse override
.0 Feed disable
.6 Rapid traverse override active
.7 Feed rate override active
.3 Feed stop, geometry axis 1
.3 Feed stop, geometry axis 2
.3 Feed stop, geometry axis 3
.6 Dry run feed rate selected
.3 Feed rate override selected for rapid traverse
.2 Revolutional feed rate active
- Feed override
- Spindle override
.7 Override active (axis or spindle)
.0 Feedrate override for spindle valid
.3 Feed stop/spindle stop
.0 Constant cutting rate active (spindle)
.3 Tapping without compensation chuck active (spindle)
Name
Specifications regarding the chamfer/rounding behavior
Maximum axis velocity
Maximum spindle speed
Dry run feedrate
Acceleration behavior of the feedrate axis when thread
cutting
Default value for path feed
179