Siemens SINUMERIK 808D Function Manual page 22

DB120x.DBB1000
DB120x.DBB1001
DB120x.DBW1002
DB120x.DBW1004
DB120x.DBD1008
DB120x.DBD3004
Variable numCuttEdgeParams
Number of P elements of an edge
DB120x.DBB1000
DB120x.DBB1001
DB120x.DBW1002
DB120x.DBW1004
DB120x.DBD1008
DB120x.DBW3004
Variable linShift
Translation of a settable work offset (channel-specific settable frames)
They only exist if MD18601 MM_NUM_GLOBAL_USER_FRAMES > 0.
There are the frame indices:
● 0: ACTFRAME = current resulting work offset
● 1: IFRAME = current settable work offset
● 2: PFRAME = current programmable work offset
● 3: EXTFRAME = current external work offset
● 4: TOTFRAME = current total work offset = total of ACTFRAME and EXTFRAME
● 5: ACTBFRAME = current total base frame
● 6: SETFRAME = current 1st system frame (PRESET, scratching)
● 7: EXTSFRAME = current 2nd system frame (PRESET, scratching)
● 8: PARTFRAME = current 3rd system frame (TCARR and PAROT with orientable tool carrier)
● 9: TOOLFRAME = current 4th system frame (TOROT and TOFRAME)
● 10: MEASFRAME = result frame for workpiece and tool gauging
● 11: WPFRAME = current 5th system frame (workpiece reference points)
● 12: CYCFRAME = current 6th system frame (cycles)
The max. frame index is 12.
The value of numMachAxes is contained in the variable with variable index 4.
DB120x.DBB1000
DB120x.DBB1001
DB120x.DBW1002
DB120x.DBW1004
DB120x.DBD1008
DB120x.DBD3004
22
Variable cuttEdgeParam [r/w]
1
-
(EdgeNo - 1) * numCuttEdgeParams + ParameterNo (WORD)
T number (1...32000) (WORD)
Write: Data to NCK variable x (data type of the variables: REAL)
Read: Data from NCK variable x (data type of the variables: REAL)
Variable numCuttEdgeParams [r]
2
-
-
-
-
Read: Data from NCK variable x (data type of the variables: WORD)
Variable linShift [r]
3
-
Frame index * numMachAxes + axis number
-
-
Read: Data from NCK variable x (data type of the variables: REAL)
Function Manual
01/2017