Siemens SINUMERIK 808D Function Manual page 312

8.
9.
10.
11.
+
Note
To restore the default startup screen, delete the customized bitmap file (startup.bmp) from the control system.
Using the machine manufacturer machine logo
The default machine logo is displayed in the machining operating area as follows. If necessary, you can use your own
machine logo.
312
Move the cursor to the folder highlighted as follows:
Press this key to open this folder.
Press this softkey to replace the default startup screen file with your own file.
Press these two keys to restart the HMI. Then you can see your own startup screen during
the startup of the control system.
Function Manual
01/2017