Siemens SINUMERIK 808D Function Manual page 313

Proceed as follows to use your own machine logo:
+
+
Note
To restore the default display of "SIEMENS" logo, delete the customized bitmap file (mtbico.bmp) from the control system.
Function Manual
01/2017
1. Prepare the image of your own machine logo in BMP format. To achieve the best display
effect, the recommended image size is 153*24 pixels for PPU161.3 and 122*19 pixels for
PPU160.2/PPU141.2. Name the image "mtbico.bmp" and save it on a USB memory stick.
2. Insert the USB stick into the USB interface on the front panel of the PPU.
3. Select the system data operating area.
4. Locate the machine logo file under the USB directory through the following softkey opera-
tions:
→
5. Select the file with cursor keys and press this softkey to copy the file.
6. Press this softkey to open the window of system data.
7. Select the HMI data folder and press this key to open it.
8. Move the cursor to the folder highlighted as follows:
9. Press this key to open this folder.
10. Press this softkey to replace the default machine logo file with your own machine logo file.
11. Press these two keys to restart the HMI. Then you can see your own machine logo in the
machining operating area.
313