Note
To use the additional axis function after activating it, set the following MDs first:
MD10000[1]
•
MD19100
•
MD20070[3]/[4]
•
MD20080[3]/[4]
•
MD14512[20]
•
MD35000
•
When necessary, set the following MDs:
MD30300
•
MD30310
•
MD30320
•
MD30330
•
For more information on how to set the parameters for the additional axis, see the SINUMERIK 808D/SINUMERIK 808D
ADVANCED Commissioning Manual.
24.3
Internet links
Overview of Internet links used:
No.
Topic
1
Web License Manager
2
Siemens A&D Mall: Customer login
3
Download server
328
3.
Set the licensed options.
For the additional axes, enter "1" or "2" in the setting column and press the following
•
key:
For the other options, press the following key to select the check box:
•
Note: For the additional axis function, press this softkey, and a warm restart is triggered on
the control system. After the restart is finished, the corresponding software function is ac-
tive.
If you assign one additional axis and set the relevant parameters correctly, the additional
axis name will be displayed in some operating areas, as shown in the following example.
Address
http://www.siemens.com/automation/license
http://mall.automation.siemens.com
http://software-download.automation.siemens.com
Function Manual
01/2017