Siemens SINUMERIK 808D Function Manual page 211

Displaying the part counter
The part counter is available for the control system to count the following information:
Time Corresponding system variable
Required parts $AC_REQUIRED_PARTS
Parts in total $AC_TOTAL_PARTS
Part count $AC_ACTUAL_PARTS
Relevant parameters:
No. Name
27880 PART_COUNTER
27882 PART_COUNTER_MCODE
The procedure for calling the part counter is as follows:
→
Or
→
→
Function Manual
01/2017
1. Select the offset operating area.
2. Press these two softkeys in succession. Then the part counter can be displayed counting
following:
1. Enter "AUTO" operating mode and select the machining operating area.
2. Press these two keys in succession.
Then the part counter can also be displayed counting the following:
Description
Required parts to be counted.
Activated by setting MD27880 BIT0 = 1:
BIT 1 = 0: if "Part count" = "Parts required", alarm or
•
interface DB3300.DBX4001.1 = 1
Total number of counted parts.
Activated by setting MD27880 BIT 4 = 1:
BIT 5 = 0: M02/M30 increases "Parts in total" to "1"
•
BIT 5 = 1: the M code defined by MD27882 increases
•
"Parts in total" to "1"
BIT 6 = 0/1: the counter does not work when "Program
•
test" is inactive
Parts actually counted.
Activated by setting MD27880 BIT 8 = 1:
BIT 9 = 0: M02/M30 increases "Parts in total" to "1"
•
BIT 9 = 1: the M code defined by MD27882 increases
•
"Parts in total" to "1"
BIT 10 = 0/1: the counter does not work when "Pro-
•
gram test" is inactive
Value Descriptions
Actual value Configuring and activating the part counter
Actual value Defining an M code for the counting action: 0 to 99
211