Description; Enable Tag; Access Right; Buttons Of New Tag Mode - Panasonic FP OPC Server User Manual

3.5.4.4 Description

Enter the description of the tag value. The description can also be seen inside the OPC client
application.

3.5.4.5 Enable Tag

Deactivate this check box to disable the tag element. In this case the element can be created
and updated within the configuration user interface, but the element is not visible from inside
the OPC client application. For further information, please refer to namespaces.

3.5.4.6 Access Right

Select the access type of the element to restrict the client access to the element. Possible
types are read only, write only and read & write.
Read only
Write only
Read & Write

3.5.4.7 Buttons of New Tag Mode

• "[Insert]"
(only available if new tag element is created)
Adds the currently specified element to the tag list and the name is updated to
<Name>_xx, where xx is an incremented digit (e.g. Tag ® Tag_0). The address is
likewise incremented (e.g. DT0 ® DT1).
• "[Remove]"
(only available if new tag element is created)
Removes the element last entered.
Note
"[Insert]" and "[Remove]" are only available if the dialog has been opened to create new tag
elements.
ACGM0143V4EN
The OPC client can only read data from the item.
Note: A write request to the client leads to an access error.
The OPC client application can only write data to the item.
Note: This setting leads to read errors if the client tries to retrieve data
from the item.
With this option, data can be read from and written to the item.
3 Graphical User Interface (GUI)
67