30/ENGINE - WORK ON THE INDIVIDUAL PARTS
Installing the rocker arm
19.37
Installing the coolant temperature sensor
19.38
–
Mount the valve keys.
Info
When mounting the valve keys, ensure that they are seated properly; it is
recommended to secure the valve keys to the valves with a small amount of
grease.
–
Place the shims in the valve spring retainer corresponding to their installation posi-
tion.
200191-10
–
Position rocker arm
Info
Ensure that the threaded hole of the rocker arm shaft is outwardly posi-
tioned.
Align the drill holes
cylinder head.
300371-11
–
Mount and tighten the rocker arm shaft screws
Guideline
Screw, rocker arm bearing
–
Mount and tighten plugs
Guideline
Plug, rocker arm
300370-11
–
Mount and tighten the coolant temperature sensor
Guideline
Coolant temperature sensor at cylinder
head
300369-10
and insert rocker arm shafts
of the rocker arm shafts with the drill holes
M7x1
.
M14x1.25
M12x1.5
.
of the
.
15 Nm
(11.1 lbf ft)
20 Nm
(14.8 lbf ft)
with O-ring.
12 Nm (8.9 lbf ft)
129