04/SHOCK ABSORBER, SWINGARM
Assembling the seal ring retainer
7.22
Assembling the piston rod
7.23
–
Mount dust boot
Mounting sleeve (T1204) (
–
Grease the sealing lip of the dust boot.
Lubricant (T625) (
200792-10
–
Grease the O-ring groove.
Lubricant (T158) (
–
Mount O-ring
–
Mount washer
200793-10
–
Position washer
–
Grease the seal ring and mount with the washer facing downward.
Lubricant (T511) (
200794-10
–
Mount centering disk
–
Mount rebound rubber
200795-10
–
Assemble the seal ring retainer. (
–
Assemble the rebound adjuster. (
–
Clamp the piston rod with the fork in a bench vise.
–
Mount bump rubber
–
Position the special tool on the piston rod.
Mounting sleeve (T1215) (
–
Grease the dust boot and slide seal ring retainer
Lubricant (T625) (
–
Remove the special tool.
200773-10
with the special tool.
p. 274)
p. 266)
p. 265)
.
.
on seal ring
.
p. 266)
.
.
p. 43)
p. 42)
and locking cap
.
p. 275)
p. 266)
onto the piston rod.
43