11/WIRING HARNESS, BATTERY
Changing the fuses of individual power consumers
14.4
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
–
Remove faulty main fuse
Info
You can recognize a faulty fuse by the burned-out fuse wire
A reserve fuse
–
Insert a new main fuse.
Fuse (58011109120)
–
Plug in connector
100427-10
–
Check the functioning of the electrical equipment.
Tip
Replace the spare fuse so that it is available if needed.
–
Attach protection covers
–
Mount the seat. (
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Open fuse box cover
100428-10
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10A - EFI control unit
Fuse 2 - 10A - fuel pump
Fuse 3 - 10A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 4 - 10A - speedometer, horn, brake light, flasher light, radiator fan
(optional)
Fuse 5 - not used
100429-10
Fuse res - 10A - spare fuses
Info
You can recognize a faulty fuse by the burned-out fuse wire
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (58011109110)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
.
is located in the starter relay.
on the starter relay.
.
p. 59)
p. 59)
.
74
.
.