Removing The Spoiler; Installing The Spoiler - HUSABERG FE 450 EU Repair Manual

07/FUEL TANK, SEAT, TRIM

Removing the spoiler

10.5

Installing the spoiler

10.6
–
Remove the wash cap set. Oil the O-ring and connect plug-in connector
fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
100439-10
–
Position the top part of the subframe.
–
Mount and tighten screws
Guideline
Screw, subframe
100432-11
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Check that the intake trumpet and the connection of the engine housing vent are
clear.
–
Install the air filter. (
–
Install the spoiler. (
–
Check the fuel system for leakage.
100433-11
–
Remove the seat. (
–
Remove screw
–
Remove screws
100430-10
–
Position the spoiler. Mount and tighten screws
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Mount the seat. (
100430-11
.

M8
.

M6
p. 57)
p. 61)
p. 59)
on the radiator.

on the fuel tank and take off the spoiler.

on the radiator.

M6
p. 59)
of the

30 Nm
(22.1 lbf ft)
10 Nm (7.4 lbf ft)
.

10 Nm (7.4 lbf ft)
61