01/FORK, TRIPLE CLAMP
–
Loosen Preload Adjuster
Pin wrench (T103) (
Info
The Preload Adjuster cannot be taken off yet.
200737-10
–
Take out the fork leg and clamp in with the axle clamp.
Info
Use soft jaws.
200690-10
–
Push the outer tube downward.
–
Pull the spring downward. Place the special tool on the hexagonal part.
Open-end wrench (T14032) (
Info
The preload spacers
200738-10
–
Clamp the special tool in the bench vise. Loosen Preload Adjuster
200739-10
–
Remove Preload Adjuster
–
Remove adjustment tube
200740-10
–
Pull the spring downward. Remove the special tool.
–
Remove the spring.
200649-01
.
p. 274)
p. 277)
should be above the special tool.
with the preload spacers
.
15
.
.