Assembling The Starter Motor; Installing The Oil Line; Removing The Engine From The Work Stand - HUSABERG FE 450 EU Repair Manual

30/ENGINE ASSEMBLY

Assembling the starter motor

20.42

Installing the oil line

20.43

Removing the engine from the work stand

20.44
–
Grease the O-ring. Position the starter motor.
Long-life grease (
–
Mount and tighten screws
Guideline
Screw, starter motor
300293-10
–
Position oil line
–
Mount and tighten banjo bolt
Guideline
Banjo bolt, oil line
–
Mount and install banjo bolt
Guideline
Banjo bolt, oil line
300292-11
–
Remove screw connections
–
Remove the engine from the work stand.
Info
Use a helper or motorized hoist.
300447-10
p. 265)
.

M6
.

with the engine oil screen and seal rings.

M12
with the seal ring.

M12
and .
 
151
10 Nm (7.4 lbf ft)
15 Nm
(11.1 lbf ft)
15 Nm
(11.1 lbf ft)