Removing The Cylinder Head; Removing The Piston; Removing The Distance Bushing - HUSABERG FE 450 EU Repair Manual

30/ENGINE DISASSEMBLY

Removing the cylinder head

18.12

Removing the piston

18.13

Removing the distance bushing

18.14
–
Pull the camshaft out of the bearing seats. Take the timing chain off of the
camshaft gear. Remove the camshaft.
300305-10
–
Remove screw
–
Unscrew screws
–
Take off the cylinder head.
–
Take off the dowels. Remove the cylinder head gasket.
300306-10
–
Push the cylinder upward.
Info
Only push the cylinder far enough upward that the piston pin can be taken
out.
–
Remove the piston pin retainer
–
Remove the piston pin.
–
Take off the cylinder and piston.
–
300307-10 Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder and piston, then the
piston can remain in the cylinder.
–
Take off dowels
300308-10
–
Remove the distance bushing
300374-10
.

in a crisscross pattern and remove.

.

and cylinder base gasket

from the countershaft.

.

102