Table of Contents
Advertisement
30/ENGINE - WORK ON THE INDIVIDUAL PARTS
–
Change the solid gear or the countershaft.
–
Check stop disks
for damage and wear.
»
If there is damage or wear:
–
Change the stop disks.
–
Use new lock rings
with every repair.
Checking the electric starter mode
19.47
0 0 6
6
5
0 0 5
0 0 2
2
0 0 4
4
3
0 0 3
Removing the free wheel
19.48
–
Check the gear mesh and bearing of starter idler gear
»
If there is damage or wear:
–
–
Check the gear mesh and bearing of torque limiter
»
If there is damage or wear:
–
–
Check the gear mesh and bearing of free wheel gear
»
If there is damage or wear:
–
–
Check free wheel
0 0 1
1
»
If there is damage or wear:
–
–
Checking the gear mesh of starter motor
»
If there is damage or wear:
–
–
Change the O-ring
–
Connect the negative cable of a 12 volt power supply to the housing of the starter
300606-01
motor. Briefly connect the positive cable of the power supply with the connector of
the starter motor.
»
If the starter motor does not turn when the circuit is closed:
–
–
Press expansion ring
300454-10
–
Take out free wheel
300456-10
Change the starter idler gear.
Change the torque limiter.
Change the free wheel gear or bearing.
for damage and wear when it is disassembled.
Change the free wheel.
Change the starter motor.
of the starter motor.
Change the starter motor.
together with suitable pliers and take off.
from the primary pinion.
for damage and wear.
for damage and wear.
for damage and wear.
for damage and wear
135
Advertisement
Table of Contents
