Checking The Fuel Pressure - HUSABERG FE 450 EU Repair Manual

2009 year
Hide thumbs Also See for FE 450 EU:
Table of Contents

Advertisement

07/FUEL TANK, SEAT, TRIM

Checking the fuel pressure

10.7
Press on the small metal plate and disconnect the fuel hose connection
300727-10
Mount the special tool.
Pressure testing tool (61029094000) (
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
300728-10
Start the engine.
Check the fuel pressure.
Fuel pressure
Under every load condition
»
If the measured value is less than the specification:
Change the fuel filter.
Check the fuel line for free flow.
Replace the fuel pump.
Switch off the engine.
Warning
Danger of burns Some vehicle components get very hot when the machine
is driven.
Wear appropriate protective clothing and safety gloves. In case of burns,
rinse immediately with lukewarm water.
Detach the special tool.
Join the fuel hose connection.
p. 269)
3.3... 3.7 bar (48... 54 psi)
62
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 570 euFe 570 usaFe 450 usaFe 570 ausFe 450 aus

Table of Contents