Fx Series Terminal Blocks (Cables And Connectors); Remote I/O; Power Supply Unit - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition

3.1.11 FX Series terminal blocks (cables and connectors)

1. FX Series terminal blocks
M
Model name
FX-16E-TB
FX-32E-TB
FX-16EX-A1-TB
FX-16EYR-TB
FX-16EYS-TB
FX-16EYT-TB
FX-16EYT-H-TB
2. Input/output cables
Model name
FX-16E-500CAB-S
FX-16E-150CAB
FX-16E-300CAB
FX-16E-500CAB
FX-16E-150CAB-R
FX-16E-300CAB-R
FX-16E-500CAB-R
FX-A32E-150CAB
FX-A32E-300CAB
FX-A32E-500CAB
3. Input/output connector
Model name
FX -I/O-CON
2C
FX -I/O-CON-S
2C
FX -I/O-CON-SA
2C

3.1.12 Remote I/O

For the remote I/O of CC-Link and CC-Link/LT, refer to the manual and catalog of each master.
N

3.1.13 Power supply unit

Model name
FX 2N -20PSU
Number of Number of
input points output points
16 input points or
16 output points
32 input points,
32 output points or
16 input/output points
16 -
- 16
- 16
- 16
- 16
5m(16'4") Bulk wire
1.5m(4'11")
3m(9'10") Flat cable (with tube). Both ends are provided with 20-pin connectors.
5m(16'4")
1.5m(4'11")
3m(9'10") Round multicore cable. Both ends are provided with 20-pin connectors.
5m(16'4")
1.5m(4'11") Flat cable (with tube). The end on the PLC side is provided with two 20-pin connectors,
3m(9'10") and the end on the terminal block side is provided with a exclusive connector. 1 common
terminal for 32 input/output points
5m(16'4")
10-piece set Input/output connector for flat cable
5-piece set
Input/output connector for bulk wire for 0.3 mm
5-piece set
Input/output connector for bulk wire for 0.5 mm
Description
24V DC power supply
3.1 List of Products and Interpretation of Model Names
Function
To be directly connected to the PLC input/output connector
100V AC input
Relay output
Triac output
Transistor output (sink)
Transistor output (sink)
Function
Function
2
[AGW22]
2
[AGW20]
Driving power supply
100 to 240V AC
3 Introduction of Products
33
1
2
3
4
5
6
7
8
9
10