Table of Contents
Advertisement
FX2N-64CL-M CC-Link/LT Master Block
4.4
Selection of connection cables, connectors and terminal resistors
For the latest information on the connection cables, connectors and terminal resistors, refer to
the homepage of the CC-Link Association (http://www.cc-link.org/) or catalogs (issued by the
CC-Link Association).
4.4.1
Selection of cables
For details on selection of connection cables, refer to the homepage of the CC-Link
Association or CC-Link/LT catalogs.
Connection cable
Dedicated flat cable
VCTF cable
High flexible cable
4.4.2
Selection of connectors
The table below shows the specifications of the VCTF cable connector and high flexible cable
connector.
For details on selection of connectors, refer to the homepage of the CC-Link Association or
CC-Link/LT catalogs.
Connector
Dedicated flat cable
connector
VCTF Cable
Connector
High Flexible Cable
Connector
*1 The body color is light blue.
4.4.3
Selection of terminal resistors
Use the CL9-TERM (gray). When only dedicated flat cables are used in the system, the CL9-
RYVK (black) is also available.
Make sure to use the terminal resistors having the same model name at the both ends of the
trunk line.
For details on terminal resistors, refer to the homepage of the CC-Link Association or CC-Link/
LT catalogs.
For specifications, refer to Section 2.3.
Model name (manufacturer name)
CL-9-CNF-18
(Mitsubishi Electric System & Service Co.Ltd)
CL9-CNR-23
(Mitsubishi Electric System & Service Co.Ltd)
CL9-CNR-20
(Mitsubishi Electric System & Service Co.Ltd)
Reference
System Configuration 4
Cover
Cable insulator
*1
outside diameter
color
−
Light blue
φ2.1 to 2.4
Green
Yellowish
φ1.8 to 2.1
green
4-6
Advertisement
Table of Contents
